Rail BandSaw RAILBAND 630
The Rail Band Saw RAILBAND 630E has been developed specifically to enable the running rails on track to be cut in situ without the need to remove either of the current rails. In addition, Railband Saws provide safety above traditional grinding disc rail cutters as grinding discs are not used.
Advantages of the Railband Saw 630 E
The Rail Band Saw RAILBAND 630 consists of two parts: the saw frame assembly, which contains the major operating parts of the machine, and the clamping device.
The saw produces high-precision cuts quickly and efficiently due to the sturdy machine frame. To ensure the safety of the operator, the saw is spark-free, easy to handle with low hand-arm vibration, low noise level and no grinding dust.
The long blade life is due to low torsion. Under normal and correct operation, a single band saw blade has a longer service life due to reduced band twist. Applying the right force necessary for cutting and minimizing wearing off the blade. It will complete a minimum of 5 cuts up to 10 cuts before failing or becoming unstable when cutting any type of running rail.
The saw produces high-precision cuts quickly and efficiently due to the sturdy machine frame. To ensure the safety of the operator, the saw is spark-free, easy to handle with low hand-arm vibration, low noise level and no grinding dust.
The long blade life is due to low torsion. Under normal and correct operation, a single band saw blade has a longer service life due to reduced band twist. Applying the right force necessary for cutting and minimizing wearing off the blade. It will complete a minimum of 5 cuts up to 10 cuts before failing or becoming unstable when cutting any type of running rail.
Technical Information
Overall Dimensions
Length: 450mm
Width: 700mm
Height: 700mm
Weight of Rail Clamp
19kg
Weight of Saw Frame
41kg
Total Weight
60kg
Cutting Capacity
165 x 180 H
Rail Cutting Capacity
UIC 60; UIC 54; UIC 50
BS 113 A Flat Bottom Rail
S 54; S 49; S 24
and others
Band Saw Blade Dimensions
Length: 1800mm
Width: 27mm
Height: 0.9mm
Band Saw Blade Type
RIX-Astroflex Bi-Band
Blade Tooth Format
Kombi 4/5 Chip-Splitter
Cutting Speed
60 M/min (Standard)
40 M/min
80 M/min (not suitable for cutting of ‘hard’ rails)
Motor Voltage / Frequency Types
110 V / 50 Hz
230 V / 50 Hz
Copyright © 2021 Yardway Railquip Limited. All rights reserved.
Web Design by Digital Square